Acrylic Gurney Flap made of 1/4 Thick Acrylic
Hardware Included
These Will Come with pre drilled holes
READ INSTALLATION INSTRUCTIONS
WATCH DIY INSTALL VID
https://www.etsy.com/listing/1148128672/10th-gen-civic-hatch-gurney-flap?click_key=48f75047a4f9f9e1da8c03e02b088f0f79685ce8%3A1148128672&click_sum=abc3484d&ref=shop_home_active_2
How To Mount:
Line Up the Flap to the wing
Mark the holes
Drill Into the wing
You Will insert Well Nuts into the holes
Then Place The Flap Over So its sitting over the Nuts
Put The Bolts Into The Flap Through The Well Nuts
You Will need an M5 Allen key
Fasten The Bolt Until They are tight
While you're fastening the bolts
The Well Nuts Will Squeeze From The Inside
Start with Middle bolts, then bolt to one side,
Other side use a heat gun to soften material
So when flexing it won't break/crack
